Description:
This is a triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient your project!
We based this breakout on the latest version of the popular LSM303 sensor, the LSM303AGR. This compact sensor uses I2C to communicate and it’s very easy to use. Simply download our library connect the SCL pin to your I2C clock pin, and the SDA pin to your I2C data pin, and upload our test program to read out accelerometer and magnetic field data.
To make life easier so you can focus on your important work, we’ve taken the LSM303AGR and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather/Raspberry Pi) or 5V (Arduino/ Metro328) logic levels. Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).? We’ve even included Molex PicoBlade connectors for the I2C bus so you don’t even need to solder!
It’s fully assembled and tested.Comes with a bit of a 0.1″ standard header in case you want to use it with a breadboard or perfboard. Four 2.5mm (0.1″) mounting holes for easy attachment
Features:
- LSM303AGR – Triple-axis accelerometer/magnetometer
- I2C Communication Interface
- Supply Voltage – 3.3V 5V
- 50 mGauss magnetic dynamic range
- 1.5 gauss magnetic sensitivity
- Accelerometer ranges:2/4/8/16 g
- As little as 1mg accelerometer sensitivity
Package Includes:
1 x SPIDER Automation LSM303AGR Accelerometer/Magnetometer
Specification:
| Model |
LSM303AGR |
|---|---|
| Supply voltage(V) |
3.3 to 5 |
| Communication Interface |
I2C |
| Length (mm): |
26.47 |
| Width (mm): |
20.83 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
