SPIDER Automation (MLX90393) Triple-Axis Magnetometer

Description:

The SPIDER Automation MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields, while still behaving as one would expect during saturation in larger fields (like a nearby magnet). The MLX90393 breakout can be used as a compass sensor but also works well as a non-contact controller, a flow meter with a magnetic impeller, or a linear actuator position sensor. To make it even easier to get your readings, all communication is enacted exclusively via I²C, utilizing our handy Molex PicoBlade system. However, we still have broken out 0.1″-spaced pins in case you prefer to use a breadboard.

The MLX90393 features a resolution rate of 0.161 T with an operating voltage range of 2.2V to 3.6V at 100A. This breakout is also equipped with a couple of jumper pads on the back of the board, a set that allows you to change the I²C address as well as one that can put the breakout into SPI mode (if I²C isn’t your cup of tea).

Note: The I²C address of the MLX90393 is 0x0C and is jumper selectable to 0x0D, 0x0E, or 0x0F. A multiplexer/Mux is required to communicate to multiple MLX90393 sensors on a single bus.

Features:

1. Operating Voltage: 2.2V-3.6V
2. Current Consumption: 100A (Typ.)
3. Operating Temperature: -20ºC – 85ºC
4. Resolution: 0.161T
5. Max Full Scale Resolution: 44,000T
6. I²C Address: 0xC0
7. 2x Molex PicoBlade Connection Ports

Package Includes:

1 x SPIDER Automation Triple Axis Magnetometer – MLX90393

Specification: