Description:
Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. This sensor tends to be paired with a 6-DoF (degree of freedom) accelerometer/gyroscope to create a 9-DoF inertial measurement unit that can detect its orientation in real space thanks to Earth’s stable magnetic field. It’s a great match for the LSM6DSOX from ST.
We based this breakout on the MMC5603, a great general-purpose magnetometer with a very wide range and both I2C and SPI interfaces. This compact sensor uses I2C to communicate and it’s very easy to use. Simply download our library connect the SCL pin to your I2C clock pin, and SDA pin to your I2C data pin, and upload our test program to read out magnetic field data. If you’d like, you can also use SPI to receive data (we just happen to prefer I2C here)
This sensor can sense ranges from 30 Gauss (3000uT or 3mT) with no range-setting required and full 20-bit output up to 1000 Hz rate reading. The range makes it good for reading Earth’s magnetic field (which maxes at about 0.6 Gauss) or some basic magnets. It isn’t good for very strong rare earth magnets, for that check out the TLV293.
To make life easier so you can focus on your important work, we’ve taken the MMC5603 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather/Raspberry Pi) or 5V (Arduino/ Metro328) logic levels. Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).We’ve even included Molex PicoBlade connectors for the I2C bus so you don’t even need to solder!
Features:
- MMC5603 Monolithic Complete 3-axis AMR Magnetic Sensor
- I2C & SPI Communication Interface
- Ultra-Small Wafer Level Package 0.8×0.8×0.4 mm
- On-chip automatic degaussing with built-in SET/RESET function
- Eliminates thermal variation-induced offset error (Null field output)
- Clears the residual magnetization resulting from strong external fields
- On-chip sensitivity compensation
- On-chip temperature sensor
- Sensor true frequency response up to 1KHz
- I2C peripheral, fast (400 KHz) mode
Package Includes:
1 x SPIDER Automation Triple-axis Magnetometer – MMC5603
Specification:
| Model |
MMC5603 |
|---|---|
| Frequency Response |
up to 1KHz |
| Supply voltage(V) |
3.3 to 5 |
| Communication Interface |
I2C & SPI |
| Length (mm): |
26.42 |
| Width (mm): |
21.08 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
